AC Infinity UIS Lighting Adapter Type-A
UIS Lighting Adapter Type-A, for RJ11/12 Connector Lights with PWM or 0-10V Dimmers
Titan Controls Titan Controls Helios Analog to Digital Signal Converter
The Titan Controls Etelligent Analog to Digital Signal Converter is used to integrate the digitally controlled Pro Sun and Bosscom fixtures into a control system that utilize a 0-10V or 0-11.5V signal. Each converter has two input channels. These input channels have two output channels for a total of four output channels overall. Each set of channels controls 512 fixtures for a total of 1024 fixtures per converter.
Hydrofarm Hydrofarm Easy Glider Light Hanging Kit
The Easy Glider light hanging kit is ideal for all your light and reflector hanging needs. It features easy push button and glide action to adjust your reflectors or lights for optimum performance. The all-metal construction features a 6 1/2 foot cable that holds up to 44 pounds per Easy Glider. Each package features one pair of Easy Gliders.
Auxilliary Trolley for LR3.5 (Slave Trolley)Light Rail 3.5 is rated to 35 lbsLight Rail 5.0 is rated to 100 lbs
Drive Wheel Replacement Kit for LightRail 3.0, 3.5 and 4.0. This is great for DIY customers. The Drive Wheel Kit comes packaged with a new tension spring and fasteners in a header labeled zip lock with instructions. Drive Wheel O-Ring Kit (Tension Spring, O-Ring, Nut, Bolt). Includes a black rubber wheel, tension spring and one bolt. For an instructional video demonstrating the assembly, go to https://www.youtube.com/watch?v=_NBIV-IjSi8Light Rail 3.5 is rated to 35 lbsLight Rail 5.0 is rated to 100 lbs
LightRail LightRail 6' Add-a-Lamp Package
Includes: LRAAI3.5 - A six-foot rail and a six-foot pushrod LRAALHDWARE - One auxiliary trolley and a hardware pack (screws, nuts, and a zip tie) Light Rail 3.5 is rated to 35 lbsLight Rail 5.0 is rated to 100 lbs
The Add A Lamp Hardware Kit includes a trolley and mounting hardware. It is used to hang additional crossbars or reflectors. It can also be used to festoon your power cords or cooling ducts.Light Rail 3.5 is rated to 35 lbsLight Rail 5.0 is rated to 100 lbs
LightRail LightRail 5.0 Auxiliary Rail
LightRail 5 Auxiliary Rail This is used with LightRail 5 and a second Add a Bar Kit (AAB KIT LR5), see item “R”, to accommodate a 3 crossbar system. The LightRail 5 Auxiliary Rail Item is packed in a tube with installation hardware and instructions. Note: The LightRail 5 Auxiliary Rail does not have rail alignment pins and does not need them because travel across the seam will not be necessary.
LightRail LightRail 5.0 Add-A-Bar Kit
The Light Rail 5 Add-A-Bar kit allows for an additional (3) light maximum expansion to existing Light Rail 5 complete systems. Add-A-Bar kits may need an additional 4' Auxiliary rail (LR5AUXRAIL) for systems that demand more than 2 total crossbar setups. Kit Contains:Adjustable Crossbar (81", 87", 93")Light Rail 5 Auxiliary TrolleySectioned Push-Pull RodMounting HardwareInstructions
LightRail LightRail 4.0 AdjustaDrive Motor w/Rail
The all new LightRail 4.0 AdjustaDrive is the newest linear light mover available from Gualala Robotics Inc. With both a zero to 60 second adjustable time delay for promoting even growth from end to end and a two to four feet per minute adjustable speed that covers a wide range of lamp intensities and travel distances, the all new LightRail 4 AdjustaDrive from Gualala Robotics, Inc. is designed and manufactured in the USA and is the ultimate in light mover control. Compatible with all LightRail 3.0 and 3.5 rails and accessory items.
Adjust-a-Drive MOTOR ONLY This item is a replacement motor for the LightRail 4.0 AdjustaDrive light mover. It has both a 0- to 60-second adjustable time delay for promoting even growth from end to end plus the added feature of two to four feet per minute adjustable speed control that covers a wide range of lamp intensities and travel distances. Comes complete with installation hardware and instructions. Note: No rail is included.