Lighting Accessories

Auxilliary Trolley for LR3.5 (Slave Trolley)Light Rail 3.5 is rated to 35 lbsLight Rail 5.0 is rated to 100 lbs

Read more less

Drive Wheel Replacement Kit for LightRail 3.0, 3.5 and 4.0. This is great for DIY customers. The Drive Wheel Kit comes packaged with a new tension spring and fasteners in a header labeled zip lock with instructions. Drive Wheel O-Ring Kit (Tension Spring, O-Ring, Nut, Bolt). Includes a black rubber wheel, tension spring and one bolt. For an instructional video demonstrating the assembly, go to https://www.youtube.com/watch?v=_NBIV-IjSi8Light Rail 3.5 is rated to 35 lbsLight Rail 5.0 is rated to 100 lbs

Read more less

Includes: LRAAI3.5 - A six-foot rail and a six-foot pushrod LRAALHDWARE - One auxiliary trolley and a hardware pack (screws, nuts, and a zip tie) Light Rail 3.5 is rated to 35 lbsLight Rail 5.0 is rated to 100 lbs

Read more less

The Add A Lamp Hardware Kit includes a trolley and mounting hardware. It is used to hang additional crossbars or reflectors. It can also be used to festoon your power cords or cooling ducts.Light Rail 3.5 is rated to 35 lbsLight Rail 5.0 is rated to 100 lbs

Read more less

LightRail 5 Auxiliary Rail This is used with LightRail 5 and a second Add a Bar Kit (AAB KIT LR5), see item “R”, to accommodate a 3 crossbar system. The LightRail 5 Auxiliary Rail Item is packed in a tube with installation hardware and instructions. Note: The LightRail 5 Auxiliary Rail does not have rail alignment pins and does not need them because travel across the seam will not be necessary.

Read more less

The Light Rail 5 Add-A-Bar kit allows for an additional (3) light maximum expansion to existing Light Rail 5 complete systems. Add-A-Bar kits may need an additional 4' Auxiliary rail (LR5AUXRAIL) for systems that demand more than 2 total crossbar setups. Kit Contains:Adjustable Crossbar (81", 87", 93")Light Rail 5 Auxiliary TrolleySectioned Push-Pull RodMounting HardwareInstructions

Read more less

The all new LightRail 4.0 AdjustaDrive is the newest linear light mover available from Gualala Robotics Inc. With both a zero to 60 second adjustable time delay for promoting even growth from end to end and a two to four feet per minute adjustable speed that covers a wide range of lamp intensities and travel distances, the all new LightRail 4 AdjustaDrive from Gualala Robotics, Inc. is designed and manufactured in the USA and is the ultimate in light mover control. Compatible with all LightRail 3.0 and 3.5 rails and accessory items.

Read more less

Adjust-a-Drive MOTOR ONLY This item is a replacement motor for the LightRail 4.0 AdjustaDrive light mover. It has both a 0- to 60-second adjustable time delay for promoting even growth from end to end plus the added feature of two to four feet per minute adjustable speed control that covers a wide range of lamp intensities and travel distances. Comes complete with installation hardware and instructions. Note: No rail is included. 

Read more less

Adjust-a-drive motor w/6' rail plus mounting hardware The all new LightRail 4.0 AdjustaDrive is the newest linear light mover available from Gualala Robotics Inc. For a rectangular growing area, a linear lamp moving system is preferable. The self-propelled Light Rail 4.0 Adjust-a-Drive is without question the finest linear lamp-mover available. It uses no pulleys, chains or gears. Simply mount the standard 6 foot track over the desired area and place the lamp-moving drive motor onto the track. The Light Rail 4.0 Adjust-a-Drive is supplied with adjustable switch stops, so lamp travel can be any length you wish. This is perfect for a start-up size garden through to a full growth garden. The standard 6 foot track may also be extended. Light Rail 4.0 comes with a 2 Year Factory Warranty. With both a 0 to 60 second adjustable time delay for promoting even growth from end to end and a two to four feet per minute adjustable speed that covers a wide range of lamp intensities and travel distances, the all new LightRail 4 AdjustaDrive from Gualala Robotics Inc. is the ultimate in light mover control. Compatible with all LightRail 3.0 and 3.5 rails and accessory items. Designed and manufactured in the USA. Light Rail 4.0 is rated to 35 lbsLight Rail 5.0 is rated to 100 lbs RPM is adjustable from 6 RPM (2 ft/min) to 10 RPM (4 ft/min)

Read more less

3-foot extension rail to extend a six-foot rail system to nine feet. 3 alignment pins & necessary mounting hardware included.

Read more less

RoboStik For LightRail 3.0, 3.5 and 4.0 The RoboStik is used for hanging a horizontal reflector from a LightRail 3.0, 3.5 or 4.0 perpendicular to the direction of travel. This item is not needed when hanging a horizontal reflector parallel to the direction of travel, but many creative uses have been found for them. It is packaged with hardware and instructions in a white box with label tape. Light Rail 3.5 is rated to 35 lbsLight Rail 5.0 is rated to 100 lbs

Read more less

For a rectangular growing area, a linear lamp moving system is preferable. The self-propelled Light Rail 3.5 Intelli-Drive is without question the finest linear lamp mover available. It uses no pulleys, chains or gears. Simply mount the standard 6 foot track over the desired area and place the lamp-moving drive motor onto the track. The Light Rail 3.5 Intelli Drive is supplied with adjustable switch stops, so lamp travel can be any length you wish. This is perfect for a start-up size garden through to a full growth garden. The standard 6 foot track may also be extended. Light Rail works great with all reflectors!Light Rail 3.5 is rated to 35 lbsLight Rail 5.0 is rated to 100 lbs

Read more less