Environmental Controllers

The Autopilot ECLIPSE F90 Master Environmental Controller allows growers to precisely control and monitor temperature, humidity, and CO2 from one centralized unit. Its three digital screens continuous display current temperature, relative humidity, and CO2 levels. LED lights indicate active modes and inform the user of any errors. The ECLIPSE F90's modern and eye-pleasing enclosure features four separate power outlets for external devices: Cooling, Heating, Humidify/Dehumidify, and CO2 ppm. All four outlets feature heavy duty protective covers that prevent atmospheric moisture from entering the device through any unused outlets. A built-in data logger records minimum and maximum temperature, humidity and CO2 ppm levels.It’s also equipped with an optional high temp shutdown feature for use with CO2 generators that is designed to save a crop in the event of an exhaust fan or AC failure. This mode allows the user to set an emergency temperature limit that will turn off the CO2 generator until the grow room temperature is reduced by 10°F. The Eclipse F90’s sensitive and intelligent remote combination probe features a highly accurate temp/humidity and low-drift dual beam CO2 sensor. The probe can be placed up to 15 feet from the controller, and has been designed to resist EMI/EFI from electronic ballasts.The controller can be mounted to a wall or grow tent. Two mounting kits are included with each controller. Features 4 outlets control temperature (heating & cooling), humidity and CO2 ppm Easily controls AC during the day and heating/dehumidification at night Fuzzy Logic setting for compressed CO2 tank and regulator setups Standard CO2 setting for use with CO2 generators (LP/NG) High temp shutdown feature for use with CO2 generators Separate day/night temperature and humidity set points Records high and low temp, humidity and CO2 levels 2/4/6°F  temperature deadband option  5% relative humidity non-adjustable deadband 15' remote sensor probe with photocell LED mode and error indicators Internal battery keeps settings during unexpected power failure 14.5 max operating amperage, 120V ETL-listed NOTE: Items APCL4X / APCL8X can be used as optional power expanders to control higher amp devices. Hardwire the power expander device to your power supply, then plug the 120V trigger cable into the appropriate outlet on the F90 controller. Now the F90 will turn on /off your device as programmed.

Read more less

The Autopilot ECLIPSE F60 Digital Environmental Controller combines precise temperature and humidity control along with cycle timing to create an intelligent yet easy-to-use unit. Three digital screens continuously display current temperature, relative humidity, and a cycle timing countdown clock. LED lights indicate active modes and inform the user of any errors. Eclipse F60 has four outlets: Cooling, Heating, Humidify/Dehumidify, Cycle Timer. The three temperature and humidity outlets offer customizable day and night set points while the cycle timer outlet controls any device requiring a repeated on/off function during a 24 hour time period. All four outlets feature heavy duty protective covers that prevent atmospheric moisture from entering the device. A built-in data logger records minimum and maximum temperature and humidity levels.The F60’s sensitive and intelligent remote combination probe features a highly accurate temperature/humidity sensor and photocell for daylight detection. The probe can be placed up to 15 feet from the controller, and has been designed to resist EMI/EFI from electronic ballasts.Mounts to both walls and grow tents. Two mounting kits are included with each controller.  Features 4 outlets control temperature (heating & cooling), humidity and a cycle timed device Operates temperature and humidity outlets independently or synchronized Separate day/night temperature and humidity set points Cycle timer outlet modes: day only/night only/24 hours Cycle timer is programmable down to 1 second Records high/low temperature & humidity levels 15' temperature and humidity sensor with photocell LED mode and error indicators Internal battery keeps settings during unexpected power failure 14.5 max operating amperage, 120V ETL-listed NOTE: Items APCL4X / APCL8X can be used as optional power expanders to control higher amp devices. Hardwire the power expander device to your power supply, then plug the 120V trigger cable into the appropriate outlet on the F60 controller. Now the F60 will turn on /off your device(s) as programmed.

Read more less

More powerful, more reliable, more capable The Autopilot PX2 Advanced Lighting Controller provides precision photoperiod control of up to 512 fixtures in two independently controlled zones, all from one centralized location. Designed to work with any controllable Phantom or Core HID fixtures, as well as PHOTOBIO LED fixtures, the PX2 can control 512 digital HID fixtures (256 per zone), or 100 analog LED fixtures (50 per zone). The PX2 offers the flexibility to operate both zones analog or digital, or one zone analog and the other digital. With this versatile, dual-zone configuration, growers can ... Optimize spectral treatments by checkerboarding lighting technologies within the same environment (e.g., HPS with CMH, LED with CMH) Save power by checker boarding identical fixtures while reducing output to one of the zones during the light cycle within the same environment Alternate rows and zones within the same environment Enhance uniformity by independent control over perimeter versus interior of the environment  Powerful features, precise and independent controlsThe PX2 provides independent control of the following features in each of its dual zones:  Photoperiod timing to control light and dark cycles Photosynthetic photon flux control to precisely schedule the PPF being emitted from fixtures during the light cycle (wattage or percentage) Auto-dimming when temperature exceeds set points Emergency auto-shutdown of lights upon user-defined over-temperature events Configurable restrike delay times to eliminate lamp-damaging hot starts Sunrise/sunset simulation settings to provide a gradual ramp-up and down at both ends of your photoperiod Built-in battery backup  Voltage: 100–240V 50/60Hz 0.3 Amps  Two dedicated temperature sensors, one for each zoneThese sensors provide real-time data for automated temperature-based dimming, as well as a high temperature shutdown feature that protects your garden. The PX2 eliminates inrush current and replaces traditional lighting contactors, reducing infrastructure investment. Updated locking signal and data cablesAll cables are shielded from electromagnetic interference to ensure uncompromising signal reliability and communication. Includes:(1) Autopilot PX2 with locking mini 3P IP65 female lighting connectors(2) 50' white temperature probes(2) 20' locking mini 3P M-RJ 6P white RF shielded data cables (for use with controllable Phantoms)(2) 20' locking mini 3P M-2P M white RF shielded data cables (for use with PHOTOBIO LEDs)(1) 5' 100–240V, 50/60Hz power adapter(2) Mounting screws(1) Instruction manual

Read more less

The APCTART2 is a cycle timer controller with day and night detection. It works to control any application requiring a device to be turned on and off at precise intervals. This timer has a wide range of uses including controlling hydroponic pumps, CO2 injection, turning on and off exhaust fans, misters and more.The cycle timer is adjustable for operation during the day, during the night, or all of the time (24 hours). We added a Memory-lock feature which will lock the set points into memory for consistent performance, even if the knobs are accidently bumped.• Controls 120V pumps, fans, and more on a periodic repeat cycle • Adjustable "ON" duration spans from 1 second to 60 minutes • Adjustable "OFF" duration spans from 1 minute to 14 hours • Built-in photocell• Functions during the day, during the night, or 24 hours • 120v, 15 amps max

Read more less

The Autopilot Cooling Thermostat is a compact and easy-to-use controller for air conditioners and exhaust fans. Simply plug it into a power receptacle and then plug your cooling device into its outlet, then choose your preferred room temperature setpoint with the rotary knob. When its built-in sensor senses that the room temperature has exceeded the setpoint by at least 1°F, it will automatically activate your cooling device by powering the outlet. Digital screen displays current room temperature. Its green LED light illuminates when the outlet is activated to on. When the temperature in the room has dropped at least 1°F, the Autopilot Cooling Thermostat will cut power to the cooling device. It has a built-in 1-degree deadband and is ETL-listed. Max power handling 15A. Features: Easy to use analog control Maintains desired room temperature Controls air conditioner or exhaust fan Temperature control range: 40 - 95°F Digital display shows current room temperature

Read more less

Control up to eight lights from one timer or controller device. 240V power is wired directly into the eight outlet timer box, and all of the outlets are controlled by one detachable 120V trigger cable. Rated for 60 amps at 120/240 with eight 120/240V X-style receptacles. The light controller is backed by a hassle free 3 year warranty.  APCL8X has eight 120/240 volt style outlets which allow running your ballasts at 120/240 volts without having to change out your ballast power cords.  FEATURES: 8000 Watt, 8 light controller  Premium quality industrial grade relays Durable steel enclosure X-style outlets allow 120V or 240V ballast operation 60 Amp maximum (30 amps x 2 relays) 120V trigger cable  

Read more less

Control multiple lights from one timer or controller device. Power is wired directly into the four-outlet timer box and all of the outlets are controlled by one detachable 120V trigger cable. Rated for 30 amps at 120/240 volts. The trigger cable can be plugged into a standard 24-hour timer or environmental controller. Three year no hassle warranty. APCL4X has four 120/240 volt style outlets which allow running your ballasts at 120/240 volts without having to change out your ballast power cords. FEATURES: 4000W 4-light controller Durable steel enclosure Premium quality industrial grade relays X-style outlets allow 120V or 240V ballast operation 30A maximum 120V trigger cable  

Read more less

Autopilot Day & Night Heating / Cooling Thermostat APCET2 is a precision temperature grow room controller for cooling OR heating devices. Connected devices are turned on & off based on the selected day and night set points. Growers can choose to have different day and night temperature set points that are automatically detected by the built-in photocell. Lock your day & night temperature variance to keep your cultivars strong & maximize growth. The new Memory-lock feature locks the set points into memory for consistent performance, even if the knobs are accidently bumped.   • Controls heating or cooling equipment with both day/night set points • Includes 20' remote precision temperature sensor • Temperature control differential +/- 3°F • Built-in photocell • 50°F–100°F control range • 120V, 15 Amp maximum

Read more less

Records and Exports 1 Year of Environmental Data! Developed to detect the presence of CO2 and to monitor temperature & relative humidity in ambient air, this device is smart, compact and easy to use. Its high quality LCD display, and it features independent CO2, RH and temperature readings. In addition, the APCEMDL comes equipped with a built-in microSD card port that automatically records all environmental data to an included microSD card. Assess and improve your grow room climate with Autopilot’s precision monitor with exportable memory.   Records and Exports 1 Year of Environmental Data! Measures & records CO2 levels, room temperature, and relative humidity Continuously records data to the included microSD card every 5 seconds Exported data is converted to Microsoft Excel file format for easy review Micro USB power socket, Micro USB-to-USB power cord, and USB power adapter Max and Min readings of CO2, Temp and RH are shown on screen at each Zoom Level Units screen displays 17 sets of data at each Zoom Level: 1 minute, 1 hour, 24 hours and 7 days  

Read more less

Accuracy, innovative features, and unbeatable affordability in one small, user-friendly CO2 monitor. To deliver its measurements, the Autopilot APCEM2 Desktop CO2 Monitor features a clear display system that boasts a digital memory chart of recorded CO2, relative humidity, and temperature readings over an adjustable 24-hour or 7-day period. With the industry-new feature Trend Chart, the device is able to trace the above quantities through past minutes, hours, or up to 7 days.  The Autopilot APCEM2 Desktop CO2 Monitor is patent pending, featuring a hook-and-loop fastener along the back that can securely affix a rectangular external battery pack. By maximizing mobility, the device can be easily moved to any room—living room, kitchen, office—to monitor IAQ virtually anywhere. The Autopilot APCEM2 Desktop CO2 Monitor can be powered by almost any standard USB port that provides power, such as a laptop, a wall adapter, or an external mobile battery pack (PowerBank). Battery pack not included.  Features: CO2/RH/Temperature monitor on a clear display  Trend Chart: shows variable Min/Hr/Day/Wk for readings of CO2/RH/Temperature  2-Channel Low Drift NDIR (non-dispersive infrared) Gas Sensor  Audible alarm for low/high CO2 levels  Alarm function for environmental extremes 3 Multicolored LEDs for Easy Reading  Built-in directory of common plant types of their general CO2 requirements; two slots for custom plant inputs  Replenish CO2 Reminder: calculates time frame based on usage from past 5 days  "Green" Power Supply that is compatible with a standard smartphone charger View charts as weekly, daily, hourly, or per minute Additional settings measure air quality for breathing PPM settings for tomatoes, cucumbers, and more Multiple options for hanging, mounting or desktop display Comes with two Micro USB Cables for power USB AC adapter APCEM2 Error Codes: Fault Icon Description of the fault  Suggested Actions Err4 IR lamp error reconnect power adapter, if the Err4 still appears, please contact the service department. Err5 Internal parameter error reconnect power adapter, if the Err5 still appears, please contact the service department. Err6 Internal calculate error reconnect power adapter, if the Err6 still appears, please contact the service department. Err7 temperature or humidity error turn off power adapter, and put the device in a dry place more than 12 hours.

Read more less

To sample CO2 levels in room air further from the controller (up to 30’ away), use this 15' sensor extension cable.

Read more less

Autopilot APC8200 CO2 Monitor & Controller with Memory offers a simple and affordable way to control, monitor and record CO2 levels over an adjustable period of time. Trace your room's CO2 levels over minutes, hours, or up to 7 days with this easy-to-use controller. The APC8200 also boasts a fully customizable CO2 setpoint and deadband. Adjust and review your CO2 levels when you want to and how you want to. The APC8200's memory feature gives growers a real edge in fine-tuning the grow room environment. Optimize your CO2 levels with this precision controller from Autopilot!   FEATURES: Fully customizable ppm deadband and CO2 setpoint allow flexibility in programming Trend Chart records CO2 levels per minute, hour, day and week for accurate analysis of CO2 distribution Adjustable Trend Chart Zoom levels let you trace your ppm levels Remote CO2 sensor probe w/photocell & 15' data cable lets you take readings from proper grow room locations 2-Channel Low Drift NDIR Sensor precisely reads CO2 ppm levels Green LED identification lights inform you of the unit's status at all times   APC8200 Error Codes: Fault Icon Description of the fault  Suggested Actions Err4 IR lamp error Please reconnect power adapter, if the Err4 still appears, please contact the service department. Err5 Internal parameter error Please reconnect power adapter, if the Err5 still appears, please contact the service department. Err6 Sensor unit Connect Error Please reconnect sensor unit and redo power on, if the Err6 still appears, please contact the service department. Err7 temperature or humidity error Please turn off power adapter, and put the device in a dry place more than 12 hours. Err8 Internal calculate error Please reconnect power adapter, if the Err6 still appears, please contact the service department.

Read more less