LED Lighting

Dimmable LED grow light designed with an optimized spectrum and diode positioning, to maximize plant yields. Specially formulated full-spectrum Samsung LM301B LEDs to achieve the highest growth rates in all plant stages. Algorithmically positioned diodes create the most uniform PAR map and the deepest canopy penetration. Dimmer enables 0 to 100% brightness. Can connect with our smart controllers to access grow cycles, scheduling, and app. Constructed on a unibody aluminum board and IP-65 rated for grow environments with higher humidity and heat. PRODUCT DESCRIPTION A full spectrum LED grow light designed with algorithmically positioned Samsung LM301B diodes to maximize plant yields. Features a proprietary driver that enables light dimming and can connect with our smart controllers. These enable pairing with additional LED light fixtures when using expansion dongles (sold separately). Built on a fanless, unibody aluminum board to dissipate heat and extend the diodes’ lifetime. All components are sealed to IP-65 standards to maintain peak performance even in a grow environment with higher temperatures and humidity. Includes a pair of metal bar hangers and rope hangers. This LED grow fixture is designed for grow tents with interior reflective Mylar lining, and used to cultivate a variety of plants, fruits, and vegetables. This product is a part of the UIS™ platform of grow devices and smart controllers, designed to integrate with each other to achieve your ideal environment. OPTIMIZED SPECTRUM Each light contains an optimized ratio of Horticulture-Series Samsung LM301B white, red, and IR LEDs designed to maximize plant yields. The diodes are then algorithmically positioned within the board to provide the most uniform PAR map coverage and deepest light penetration. These features help achieve the highest growth rates in germination, vegetative, and flowering stages. FUTURE READY CONTROLS Features a proprietary LED driver that enables 0-100% dimming with an easy-to-use control knob that adjusts light intensity in 20% increments. The driver also contains a port that enables daisy chaining and can connect with our smart controllers to access grow cycles, scheduling, app control, and more. Join our ecosystem of controllers and grow equipment including fans and lights, all working together to achieve the optimal environment.

Read more less

Dimmable LED grow light designed with an optimized spectrum and diode positioning, to maximize plant yields. Specially formulated full-spectrum Samsung LM301B LEDs to achieve the highest growth rates in all plant stages. Algorithmically positioned diodes create the most uniform PAR map and the deepest canopy penetration. Dimmer enables 0 to 100% brightness. Can connect with our smart controllers to access grow cycles, scheduling, and app. Constructed on a unibody aluminum board and IP-65 rated for grow environments with higher humidity and heat. PRODUCT DESCRIPTION A full spectrum LED grow light designed with algorithmically positioned Samsung LM301B diodes to maximize plant yields. Features a proprietary driver that enables light dimming and can connect with our smart controllers. These enable pairing with additional LED light fixtures when using expansion dongles (sold separately). Built on a fanless, unibody aluminum board to dissipate heat and extend the diodes’ lifetime. All components are sealed to IP-65 standards to maintain peak performance even in a grow environment with higher temperatures and humidity. Includes a pair of metal bar hangers and rope hangers. This LED grow fixture is designed for grow tents with interior reflective Mylar lining, and used to cultivate a variety of plants, fruits, and vegetables. This product is a part of the UIS™ platform of grow devices and smart controllers, designed to integrate with each other to achieve your ideal environment. OPTIMIZED SPECTRUM Each light contains an optimized ratio of Horticulture-Series Samsung LM301B white, red, and IR LEDs designed to maximize plant yields. The diodes are then algorithmically positioned within the board to provide the most uniform PAR map coverage and deepest light penetration. These features help achieve the highest growth rates in germination, vegetative, and flowering stages. FUTURE READY CONTROLS Features a proprietary LED driver that enables 0-100% dimming with an easy-to-use control knob that adjusts light intensity in 20% increments. The driver also contains a port that enables daisy chaining and can connect with our smart controllers to access grow cycles, scheduling, app control, and more. Join our ecosystem of controllers and grow equipment including fans and lights, all working together to achieve the optimal environment.

Read more less

Dimmable LED grow light designed with an optimized spectrum and diode positioning, to maximize plant yields. Specially formulated full-spectrum Samsung LM301B LEDs to achieve the highest growth rates in all plant stages. Algorithmically positioned diodes create the most uniform PAR map and the deepest canopy penetration. Dimmer enables 0 to 100% brightness. Can connect with our smart controllers to access grow cycles, scheduling, and app. Constructed on a unibody aluminum board and IP-65 rated for grow environments with higher humidity and heat. PRODUCT DESCRIPTION A full spectrum LED grow light designed with algorithmically positioned Samsung LM301B diodes to maximize plant yields. Features a proprietary driver that enables light dimming and can connect with our smart controllers. These enable pairing with additional LED light fixtures when using expansion dongles (sold separately). Built on a fanless, unibody aluminum board to dissipate heat and extend the diodes’ lifetime. All components are sealed to IP-65 standards to maintain peak performance even in a grow environment with higher temperatures and humidity. Includes a pair of metal bar hangers and rope hangers. This LED grow fixture is designed for grow tents with interior reflective Mylar lining, and used to cultivate a variety of plants, fruits, and vegetables. This product is a part of the UIS™ platform of grow devices and smart controllers, designed to integrate with each other to achieve your ideal environment. OPTIMIZED SPECTRUM Each light contains an optimized ratio of Horticulture-Series Samsung LM301B white, red, and IR LEDs designed to maximize plant yields. The diodes are then algorithmically positioned within the board to provide the most uniform PAR map coverage and deepest light penetration. These features help achieve the highest growth rates in germination, vegetative, and flowering stages. FUTURE READY CONTROLS Features a proprietary LED driver that enables 0-100% dimming with an easy-to-use control knob that adjusts light intensity in 20% increments. The driver also contains a port that enables daisy chaining and can connect with our smart controllers to access grow cycles, scheduling, app control, and more. Join our ecosystem of controllers and grow equipment including fans and lights, all working together to achieve the optimal environment.

Read more less

Dimmable LED grow light designed with an optimized spectrum and diode positioning, to maximize plant yields. Specially formulated full-spectrum Samsung LM301B LEDs to achieve the highest growth rates in all plant stages. Algorithmically positioned diodes create the most uniform PAR map and the deepest canopy penetration. Dimmer enables 0 to 100% brightness. Can connect with our smart controllers to access grow cycles, scheduling, and app. Constructed on a unibody aluminum board and IP-65 rated for grow environments with higher humidity and heat. PRODUCT DESCRIPTION A full spectrum LED grow light designed with algorithmically positioned Samsung LM301B diodes to maximize plant yields. Features a proprietary driver that enables light dimming and can connect with our smart controllers. These enable pairing with additional LED light fixtures when using expansion dongles (sold separately). Built on a fanless, unibody aluminum board to dissipate heat and extend the diodes’ lifetime. All components are sealed to IP-65 standards to maintain peak performance even in a grow environment with higher temperatures and humidity. Includes a pair of metal bar hangers and rope hangers. This LED grow fixture is designed for grow tents with interior reflective Mylar lining, and used to cultivate a variety of plants, fruits, and vegetables. This product is a part of the UIS™ platform of grow devices and smart controllers, designed to integrate with each other to achieve your ideal environment. OPTIMIZED SPECTRUM Each light contains an optimized ratio of Horticulture-Series Samsung LM301B white, red, and IR LEDs designed to maximize plant yields. The diodes are then algorithmically positioned within the board to provide the most uniform PAR map coverage and deepest light penetration. These features help achieve the highest growth rates in germination, vegetative, and flowering stages. FUTURE READY CONTROLS Features a proprietary LED driver that enables 0-100% dimming with an easy-to-use control knob that adjusts light intensity in 20% increments. The driver also contains a port that enables daisy chaining and can connect with our smart controllers to access grow cycles, scheduling, app control, and more. Join our ecosystem of controllers and grow equipment including fans and lights, all working together to achieve the optimal environment.

Read more less

Innovative halo design produces uniform coverage and deeper light penetration to maximize plant yields. Specially formulated with full-spectrum Samsung LM301H white, red, and IR LEDs optimized for all grow stages. Linear bar light design adapted into four-sided halo form factor to achieve commercial lighting output. Digital controller with daisy-chaining ports featuring PWM dimming, timers, cycles, and backup memory. Air-suspended driver over aluminum heatsink passively cools LEDs to last longer and boost PAR output. PRODUCT DESCRIPTION An indoor LED grow lamp with an innovative halo design crafted to maximize plant yields by providing uniform coverage and deeper light penetration. This LED grow system uses the latest Samsung LM301H diodes to efficiently produce full-spectrum lighting fit for use during the germination, vegetative, and flowering stages. The grow tent light is built with a raised LED driver, set on top of an aluminum frame with a thermal compound for no-noise heat dissipation. This, along with the included digital controller, also enables pairing with additional LED grow lights when using expansion dongles (sold separately). It is primarily set in grow tents with interior reflective Mylar lining, and used to cultivate a variety of plants, fruits, and vegetables. Each unit is plug-and-play, and includes a set of rope hanging hardware to be ready for use out of the box. This product is a part of the UIS™ platform of grow devices and smart controllers, designed to integrate with each other to achieve your ideal environment. SPECIALIZED FORM FACTOR These light-emitting diodes are arranged in a halo ring form factor, which allows for even coverage and deeper penetration. This lighting maximizes your grow tent’s capacity and growth potential by expanding the amount of usable growing space and reaching past your plant’s canopy. The diodes’ arrangement also enables the LED grow light to achieve commercial bar light performance and provide full coverage in 2x2 spaces. DIGITAL CONTROLLER Each system includes a programmable controller that is capable of efficient 0-100% PWM dimming. Set timers and consistent light cycles up to 24 hours for both on and off. Features baseline brightness levels and backup memory in case of a temporary power loss. Controllers can be detached to be mounted remotely and are built with extension ports to provide programming to additional LED grow lights.

Read more less

Innovative halo design produces uniform coverage and deeper light penetration to maximize plant yields. Specially formulated with full-spectrum Samsung LM301H white, red, and IR LEDs optimized for all grow stages. Linear bar light design adapted into four-sided halo form factor to achieve commercial lighting output. Digital controller with daisy-chaining ports featuring PWM dimming, timers, cycles, and scheduling. Air-suspended driver over aluminum heatsink passively cools LEDs to last longer and boost PAR output. PRODUCT DESCRIPTION An indoor LED grow lamp with an innovative halo design crafted to maximize plant yields by providing uniform coverage and deeper light penetration. This LED grow system uses the latest Samsung LM301H diodes to efficiently produce full-spectrum lighting fit for use during the germination, vegetative, and flowering stages. The grow tent light is built with a raised LED driver, set on top of an aluminum frame with a thermal compound for no-noise heat dissipation. This, along with the included digital controller, also enables pairing with additional LED grow lights when using expansion dongles (sold separately). It is primarily set in grow tents with interior reflective Mylar lining, and used to cultivate a variety of plants, fruits, and vegetables. Each unit is plug-and-play, and includes a set of rope hanging hardware to be ready for use out of the box. This product is a part of the UIS™ platform of grow devices and smart controllers, designed to integrate with each other to achieve your ideal environment. SPECIALIZED FORM FACTOR These light-emitting diodes are arranged in a halo ring form factor, which allows for even coverage and deeper penetration. This lighting maximizes your grow tent’s capacity and growth potential by expanding the amount of usable growing space and reaching past your plant’s canopy. The diodes’ arrangement also enables the LED grow light to achieve commercial bar light performance and provide full coverage in 2x2 spaces. DIGITAL CONTROLLER Each system includes a programmable controller that is capable of efficient 0-100% PWM dimming. Set consistent light schedules, light cycles, and timers. Customize transitions that can mimic the gradual dimming of sunrise and sunset. Features baseline brightness levels and backup memory in case of a temporary power loss. Controllers can be detached to be mounted remotely and are built with extension ports to provide programming to additional LED grow lights. 

Read more less

The Phantom PHENO 440 horticultural lighting system combines high photon flux with superior efficiency. The low-profile design and wide voltage range is ideal for a wide range of applications. Two adjustable light bars allow user to adjust light spread. Integrated output knob provides control over the amount of photons to the plant canopy. Suitable for both flowering and vegetative stages, the Multi Phase (MP) spectrum provides ideal red to blue ratio for vigorous growth and to maximize flower development. Features: 1100 μmol/s PPF @277V 2.5 μmol/joule PPE @277V 440W, 100-277V Driver High-efficiency Multi Phase spectrum Integrated flux control knob Compact sized: 31.49"x 16.8" x 4.1" Net Weight: 19.4lbs/ 8.8kg Includes 10' 120V power cord DLC listed (H-LORIQO2) and qualifies for utility rebates, which play a significant role in optimizing the cost effectiveness of a lighting project   The Phantom PHENO offers the functionality of an on board dimming knob, allowing the grower to adjust the photon output intensity to accommodate the various stages of plant growth for optimal photosynthesis activation. With the knob adjusted to 100%, the PHENO uses 440W and puts out 1100 μmol/s photon flux (PPF). With the knob adjusted to 40%, the PHENO uses 176w and puts out 40% of the photon flux. The Multi-Phase spectrum does not change when using the dimmer knob and still provides ideal red to blue ratio for vigorous growth and to maximize flower development. KNOB POSITION CONDITION/NOTES PHOTON FLUX (µmol/s) AVERAGE POWER (WATTS) EXT SWITCH THE KNOB TO THIS FOR USE WITH 0-10V CONTROLLER VARIABLE VARIABLE OFF NO LIGHT EMMITTED 0 µmol/s 0W 100% 100% OF TOTAL LIGHT EMMITTED 1100µmol/s 440W 80% 80% OF TOTAL LIGHT EMMITTED 880 µmol/s 352W 60% 60% OF TOTAL LIGHT EMMITTED 660 µmol/s 264W 40% 40% OF TOTAL LIGHT EMMITTED 440 µmol/s 176W

Read more less

The PowerPAR 4 Foot LED Light Fixture is thoughtfully designed as an efficient light source for propagation (cloning) and seedling growth when working with multiple standard nursery trays.  This fixture is sized to uniformly light four standard trays in a rectangular configuration.  It is suitable for dry and damp locations.  Driver can be remotely mounted for easy access and increased thermal control inside of the growing environment.  Can be interconnected (daisy chained) so multiple fixtures can be powered from a single power source for a simple and convenient set up (up to 6 fixtures on 120V and up to 12 fixtures on 240V). 120-240V Input Voltage 4000k Color Temperature 325 Total Photon Flux (µmol/s) 50,000 hrs Average Rated Life 2.10 PPE (µmol/J) Driver Can Be Mounted Remote Includes 10' AC Power Cord and 8' Driver Extension Cord Includes Two V Hook Hanging Brackets 5 Year Limited Warranty

Read more less

PHOTOBIO•VP is a modular, high-efficiency LED system designed for vegetative, propagation, and vertical farming. PHOTOBIO•VP’s slim vertical profile maximizes vertical real estate allowing greater production space, and modular design lets you link and power multiple 100–277V fixtures from a single input power. PHOTOBIO•VP features a tailored spectrum for vegetative and propagation growth stages, ideal for vertical farming and propagation. IP65 ingress protection rating from dust and liquids. IP65 power connection allows quick attachment at the fixture for easy installation and maintenance. Sold in pairs.  Features: 32W horticultural LED solution with slim vertical profile 47.3" length x 1.3" width x 1.3" height and 1.5 lbs 73.6 umol/s Photon Flux @ 277V 67.2 umol/s PPF 2.3 umol/J efficacy @ 277V Lumiled diodes produce the VE Spectrum Daisy chain 10-23 fixtures together from a single power source depending on the voltage Passive heat cooling Liquid tight push lock connectors compatible with existing PHOTOBIO cable environment Power cords sold separately Voltage: 120-277V 5 year warranty IP65 rated CE, ETL, FCC, DLC Certified Includes 4 mounting clips, screws, and zip-ties for installation **SOLD IN PAIRS, PERFORMANCE SPECIFICATIONS FOR SINGLE FIXTURE**   

Read more less

PHOTOBIO•VP is a modular, high-efficiency LED system designed for vegetative, propagation, and vertical farming. PHOTOBIO•VP’s slim vertical profile maximizes vertical real estate allowing greater production space, and modular design lets you link and power multiple 100–277V fixtures from a single input power. PHOTOBIO•VP features a tailored spectrum for vegetative and propagation growth stages, ideal for vertical farming and propagation. IP65 ingress protection rating from dust and liquids. IP65 power connection allows quick attachment at the fixture for easy installation and maintenance. Sold in pairs.  Features: 32W horticultural LED solution with slim vertical profile 47.3" length x 1.3" width x 1.3" height and 1.5 lbs 73.6 umol/s Photon Flux @ 277V 67.2 umol/s PPF 2.3 umol/J efficacy @ 277V Lumiled diodes produce the VE Spectrum Daisy chain 10-23 fixtures together from a single power source depending on the voltage Passive heat cooling Liquid tight push lock connectors compatible with existing PHOTOBIO cable environment Power cords sold separately Voltage: 120-277V 5 year warranty IP65 rated CE, ETL, FCC, DLC Certified Includes 4 mounting clips, screws, and zip-ties for installation **SOLD IN PAIRS, PERFORMANCE SPECIFICATIONS FOR SINGLE FIXTURE** 

Read more less

PHOTOBIO•VP is a modular, high-efficiency LED system designed for vegetative, propagation, and vertical farming. PHOTOBIO•VP’s slim vertical profile maximizes vertical real estate allowing greater production space, and modular design lets you link and power multiple 100–277V fixtures from a single input power. PHOTOBIO•VP features a tailored spectrum for vegetative and propagation growth stages, ideal for vertical farming and propagation. IP65 ingress protection rating from dust and liquids. IP65 power connection allows quick attachment at the fixture for easy installation and maintenance. Sold in pairs.  Features: 32W horticultural LED solution with slim vertical profile 47.3" length x 1.3" width x 1.3" height and 1.5 lbs 73.6 umol/s Photon Flux @ 277V 67.2 umol/s PPF 2.3 umol/J efficacy @ 277V Lumiled diodes produce the VE Spectrum Daisy chain 10-23 fixtures together from a single power source depending on the voltage Passive heat cooling Liquid tight push lock connectors compatible with existing PHOTOBIO cable environment Power cords sold separately Voltage: 120-277V 5 year warranty IP65 rated CE, ETL, FCC, DLC Certified Includes 4 mounting clips, screws, and zip-ties for installation **SOLD IN PAIRS, PERFORMANCE SPECIFICATIONS FOR SINGLE FIXTURE** 

Read more less

PHOTOBIO•VP is a modular, high-efficiency LED system designed for vegetative, propagation, and vertical farming. PHOTOBIO•VP’s slim vertical profile maximizes vertical real estate allowing greater production space, and modular design lets you link and power multiple 100–277V fixtures from a single input power. PHOTOBIO•VP features a tailored spectrum for vegetative and propagation growth stages, ideal for vertical farming and propagation. IP65 ingress protection rating from dust and liquids. IP65 power connection allows quick attachment at the fixture for easy installation and maintenance. Sold in pairs.  Features: 32W horticultural LED solution with slim vertical profile 47.3" length x 1.3" width x 1.3" height and 1.5 lbs 73.6 umol/s Photon Flux @ 277V 67.2 umol/s PPF 2.3 umol/J efficacy @ 277V Lumiled diodes produce the VE Spectrum Daisy chain 10-23 fixtures together from a single power source depending on the voltage Passive heat cooling Liquid tight push lock connectors compatible with existing PHOTOBIO cable environment Power cords sold separately Voltage: 120-277V 5 year warranty IP65 rated CE, ETL, FCC, DLC Certified Includes 4 mounting clips, screws, and zip-ties for installation **SOLD IN PAIRS, PERFORMANCE SPECIFICATIONS FOR SINGLE FIXTURE** 

Read more less