Garden Accessories

CenturionPro DBT1 Accessory Kief TumblerKief Filter ScreenMake sure that nothing goes to waste by adding the Kief Filter Screen upgrade to your DBT. This upgrade essentially gives you two machines in one. After you’ve completed your batch trim, remove your trimmed flower, swap out the DBT tumbler with your Kief Filter Screen tumbler and run the trim from your trim bin. The 150-micron mesh screen is made of medical grade stainless steel, so you end up with perfectly separated flower, trim and kief all customer ready and all from just one machine. This must have will pay for itself time and time again. Specifications Shipping Dimensions: 21.5"L x 13"W x 10.5"H Weight: 6 lbs Warranty: 1-year

Read more less

CenturionPro TableTop Parts KitThis is an essential spare parts kit for the TableTop Trimmer containing the following: Parts Assembly Kit – 1 Kief Collection System – 1 Belt – 1 Cam Follower – 2 Brush – 1 Hose – 1 This kit is great to have on hand to keep your TableTop Trimmer operating at all times.

Read more less

CenturionPro GC3 Triple Gentle Cut Bucker with Stand GC refers to “Gentle Cut” as we appreciate and understand how delicate flowers are. This bucker cuts the flowersoff the stem, which prevents the large crown buds from breaking apart into smaller pieces. This keeps the structure of the buds fully intact preserving the look of the flower.  Whether you buck wet or dry, the GC3 bucker accepts stems up to 3/8" in diameter and will successfully de-stem flower up to a rate of 120 pounds per hour of fully hydrated flowers. This system also provides unparalleled processing capacity and produces over 10,000 cuts per minute with three 0.25hp motors.  The GC3 Triple Bucker comes mounted on a Bucker Stand with our standard industrial casters.SPECS:Input Voltage: NA: 120V, 60Hz, Single PhaseCurrent Draw: < 23A OperatingDimensions: 32”L x 85”W x 51”HWeight: 391lbsMotor: 0.25 (x3) hp | 1750 RPM (x3)Circuit Breaker Required: NA: 30A/120VHuman Worker Replacement: 6-9 peopleFeed Rate: Wet: up to 120 lbs/hr | Dry: up to 24 lbs/hrFeed Entry Sizes: 3-Hole (3/16”, 1/4”, 3/8”)Feed Type: Wet/DryPrimary Materials: 304 Stainless Steel / AluminumWarranty: 5 years

Read more less

CenturionPro HP3 Triple High Performance Bucker with Stand HP refers to “High Performance” and utilizes two rollers that pull the stem into the machine and pop the flowers off. This allows you to continuously feed the bucker for more efficient de-stemming and results in the industry’s highest buck rate per hour.  The first triple-headed bucker, the HP3 accepts wet or dry stems up to 3/4” and can buck up to 500 pounds per hour of fully hydrated flower. With a variable speed controller this de-stemmer provides unsurpassed power, adjustability, control and is easy to set up. Made of stainless steel and anodized aluminum it is robust as well as easy to maintain.  The HP3 Triple Bucker comes mounted on a Bucker Stand with our standard industrial casters.SPECS:Input Voltage: NA: 120V, 60Hz, Single PhaseCurrent Draw: < 7.5A OperatingDimensions: 85”L x 32”W x 51”HWeight: 471 lbsDrive Motor: 0.75 hp, IP54 (x3) | 1690 RPM (x3)Circuit Breaker Required: NA: 20A/120VHuman Worker Replacement: 15-21 peopleFeed Throughput: Wet: up to 500 lbs/hr | Dry: up to 100 lbs/hrFeed Entry Sizes: 5-Hole (3/16”, 1/4”, 3/8”, 1/2", 3/4")Feed Type: Wet/DryRoller Sets: Neoprene RubberVariable Speed: YesMotor Pulse: YesReverse Operation: YesDuty Cycle: ContinuousPull Speed: 10-30 in/s (x3)Pull Strength: > 400 lbs (x3)Primary Materials: 304 Stainless Steel / AluminumWarranty: 10 years

Read more less

CenturionPro HPM Single High Performance Mini Bucker Expanding on CenturionPro’s vision to develop an industry-leading bucker for every harvest, the HP Mini Bucker is a powerful yet affordable solution to streamline small to medium harvests.The HP Mini Bucker was inspired by the industry-leading HP1 Bucker. HP refers to “High Performance” and utilizes two rollers that pull the stem into the machine to pop the flowers off. This allows you to continuously feed the bucker for more efficient de-stemming, resulting in the industry’s highest buck rate per hour. The HP Mini Bucker comes with 3-hole sizes, accepts wet or dry stems up to 1/2” and can buck up to 125 pounds per hour wet (up to 25 pounds per hour dry). The elite harvesting solution benefits from a 0.75 HP gear driven motor with variable speeds for formidable power and versatility. Variable speed control makes processing wet and dry plants a breeze, while stainless steel and anodized aluminium construction makes it robust and easy to clean.  The HP Mini Bucker plugs into a 110-volt, 15-amp circuit – EU/AUS Compatible. Backed by a 5-year warranty. SPECS:Input Voltage: NA: 120V, 60Hz Single PhaseCurrent Draw: NA: < 6A OperatingDimensions: 22″ L x 16″ W x 20″ HWeight: 97 lbsDrive Motor: 0.75 hp, IP54 | 1690 RPM Variable Speed Control: Yes Circuit Breaker Required: NA: 15A/120VFeed Rate: Wet: +125 lbs/hr | Dry: +25 lbs/hrFeed Entry Sizes: 3-Hole (1/4”, 3/8”, 1/2") Feed Type: Wet/Dry Roller Sets: Neoprene Rubber Motor Pulse: Yes Reverse Operation: Yes Duty Cycle: Continuous Pull Speed: 10-30 in/s Pull Strength: > 400 lbs Primary Materials: 304 Stainless Steel / Aluminum Warranty: 5 years 

Read more less

CenturionPro GCM Single Gentle Cut Mini BuckerExpanding on CenturionPro’s vision to develop an industry-leading bucker for every harvest, the GC Mini Bucker is a powerful yet affordable solution to streamline small to medium harvests.The GC MINI Bucker is inspired by the GC1 Bucker, the industry’s first and only machine specifically designed for destemming dry plants. GC refers to “Gentle Cut” as CenturionPro appreciates and understands how delicate flowers are.A scaled down version of our best selling GC1 Bucker, the GC Mini Bucker is as powerful as it is affordable. This de-budder cuts the flowers off the stem, rather than popping them off.  This cutting action prevents the large crown buds from breaking apart into smaller pieces, thereby keeping the complete structure of the buds fully intact preserving the look of your flower.The GC Mini Bucker accepts stems up to 3/8" in diameter and will process up to 20 pounds of fully hydrated flower per hour! Foregoing the GC1 Bucker’s blower and mighty 0.5hp motor for improved portability, the GC Mini Bucker instead benefits from a 0.25hp motor that can produce up to 3,000 cuts per minute.In keeping with CenturionPro’s commitment to reliable, industrial, simple and efficient machines, the GC Mini Bucker is easy to set up and requires little maintenance.  SPECS:Input Voltage: NA: 120V, 60Hz Single Phase | EU, AUS: 240V, 50Hz Single Phase Current Draw: NA: < 6A Operating | EU, AUS: < 3A OperatingDimensions: 15″ L x 17″ W x 19″ H | 38cm L x 43cm W x 48cm HWeight: 46 lbs | 21 kgMotor: 0.25 hp | 1750 RPMCircuit Breaker Required: NA: 15A/120V | EU, AUS: 15A/220V Blade Length: 9-5/8”Feed Type: Dry/WetFeed Rate: Dry: +4 lbs/hr | Wet: +20 lbs/hrFeed Entry Sizes: 3-Hole (3/16”, 1/4”, 3/8”) Primary Materials: 304 Stainless Steel / Aluminum Warranty: 2 years 

Read more less

CenturionPro GC1 BuckerGC refers to “Gentle Cut” as we appreciate and understand how delicate flowers are. This bucker cuts the flowers off the stem, which prevents the large crown buds from breaking apart into smaller pieces. This keeps the structure of the buds fully intact preserving the look of the flower.  The GC Buckers are the industry’s first and only bucking machines designed specifically for use on dry product, but work great on wet product also. The GC1 accepts stems up to 3/8" in diameter and can do the work of 2-3 human workers and will process up to 40 pounds–per hour–of fully hydrated flowers! The GC1 has a 0.25hp motor that produces over 3000 cuts per minute, making it the perfect tabletop machine. Plus, it is easy to set up, clean and requires little maintenance!SPECSInput Voltage: NA: 120V, 60Hz, Single Phase | EU, AUS: 240V, 50Hz, Single Phase Current Draw: < 3A Operating Dimensions: 27.5″ L x 15″ W x 18″ H Weight: 65 lbs | 29.5 kg Motor: 0.25 hp | 1750 RPM Circuit Breaker Required: NA: 15A/120V | EU, AUS: 15A/220V Human Worker Replacement: 2-3 people Feed Rate: Wet: up to 40 lbs/hr | Dry: up to 8 lbs/hr Feed Entry Sizes: 3-Hole (3/16”, 1/4”, 3/8”) Feed Type: Wet/Dry Primary Materials: 304 Stainless Steel / Aluminum Warranty: 5 years 

Read more less

CenturionPro HP1 BuckerHP refers to “High Performance” and utilizes two rollers that pull the stem into the machine and pop the flowers off. This allows you to continuously feed the bucker for more efficient de-stemming and results in the industry’s highest buck rate per hour. The HP1 comes with a bucker stand and table-top set-up legs included for added value and versatility.  With 5-hole sizes, the HP1 accepts wet or dry stems up to 3/4” and can buck up to 175 pounds (up to 35 lbs/hr dry) per hour, replacing 5-7 human workers. When combined with the high productivity of the CenturionPro trimming machines, you’ll get the highest capacity harvesting system in the world! The HP1 comes complete with a 0.75 HP gear driven motor with variable speeds to provide unsurpassed power and adjustability. Thanks to the variable speed controls, both wet and dry products can be processed with ease! The system is easy to set up and is made of stainless steel and anodized aluminum making it robust as well as easy to clean. The HP1 plugs into a 110-volt, 15-amp circuit – EU/AUS Compatible. Backed by a 5 years warranty. The HP1 bucker is simple, powerful, and effective and will process product at an unprecedented rate. The bucker stand comes standard with industrial casters. SPECSInput Voltage: NA: 120V, 60Hz, Single Phase | EU, AUS: 240V, 50Hz, Single Phase Current Draw: < 2.5A Operating Dimensions: 32.5″ L x 37″ W x 59″ H Weight: 198 lbs | 90 kg Drive Motor: 0.75 hp, IP54 | 1690 RPM Circuit Breaker Required: NA: 15A/120V | EU, AUS: 15A/220V Human Worker Replacement: 5-7 people Feed Rate: Wet: up to 175 lbs/hr | Dry: up to 35 lbs/hr Feed Entry Sizes: 5-Hole (3/16”, 1/4”, 3/8”, 1/2", 3/4") Feed Type: Wet/Dry Roller Sets: Neoprene Rubber Variable Speed: Yes Motor Pulse: Yes Reverse Operation: Yes Duty Cycle: Continuous Pull Speed: 10-30 in/s Pull Strength: > 400 lbs Primary Materials: 304 Stainless Steel / Aluminum Warranty: 5 years 

Read more less

CenturionPro 3.0 Quantanium Wet/DryThe 3.0 Medical Grade Trimming System is one of the highest capacity commercial-scale automated trimmers in the world. This machine is composed of medical grade anodized aluminum and stainless-steel components. The 3.0 Standard System comes all-inclusive with the largest hopper in the industry (food grade), a 6-horsepower leaf collector suction system and CenturionPro’s unique triple-bag kief filtration & trim collection system. These machines are specially designed to trim both wet and dry material. Quantanium Tumbler Upgrade CenturionPro’s Quantanium Coated Tumblers delicately handle flowers and give 40% greater trichome preservation. This technology prevents precious trichomes from adhering to the tumbler surface without the need for special lubricants or sprays. This also speeds up the harvesting process since no downtime is required to stop and clean the tumblers throughout the day. A simple wipe down with a cloth and warm water will remove the small amount of residue that may be present. SPECS: Input Voltage: 13Amp – 110V (Machine), 34Amp – 220V (Blower)Dimensions: 36″ L x 36″ W x 28″ H Weight: 225lbs Tumbler Diameter: 3 x 6.5" Tumbler Length: 3 x 35” Number of Tumblers: 3 Human Trimmer Replacement: 160 workers Processing Capability: Wet: up to 200 lbs/hr | Dry: up to 40 lbs/hr Cuts Per Minute: 140,000 Warranty: 10 yearPURCHASE OPTIONS: CPS6000: 3 Hybrid Wet/Dry Electropolished TumblersCPS6043: 3 Hybrid Wet/Dry Quantanium Tumblers

Read more less

CenturionPro Gladiator Quantanium Wet/DryThe Gladiator is currently one of the highest capacity trimming machines in the world. This commercial-scale trimmer does heavy throughput without sacrificing quality, making it an incredibly powerful tool for any commercial operation. The Gladiator Standard System comes all-inclusive with the largest hopper in the industry, a 4-horsepower leaf collector suction system and CenturionPro’s unique triple-bag kief filtration & trim collection system. These machines are specially designed to trim both wet and dry material. Quantanium Tumbler Upgrade CenturionPro’s Quantanium Coated Tumblers delicately handle flowers and give 40% greater trichome preservation. This technology prevents precious trichomes from adhering to the tumbler surface without the need for special lubricants or sprays. This also speeds up the harvesting process since no downtime is required to stop and clean the tumblers throughout the day. A simple wipe down with a cloth and warm water will remove the small amount of residue that may be present.SPECS: Input Voltage: 7Amp – 110V (Machine), 22Amp – 220V (Blower)Dimensions: 30" L x 25" W x 28" H Weight: 165lbs Tumbler Diameter: 2 x 6.5" Tumbler Length: 2 x 30” Number of Tumblers: 2 Human Trimmer Replacement: 100 workers Processing Capability: Wet: up to 125 lbs/hr | Dry: up to 25 lbs/hr Cuts Per Minute: 75,000 Warranty: 10 yearPURCHASE OPTIONS: CPS5000: 2 Hybrid Wet/Dry Electropolished TumblerCPS5034: 2 Hybrid Wet/Dry Quantanium Tumbler

Read more less

CenturionPro Gladiator Electropolished Wet/DryThe Gladiator is currently one of the highest capacity trimming machines in the world. This commercial-scale trimmer does heavy throughput without sacrificing quality, making it an incredibly powerful tool for any commercial operation. The Gladiator Standard System comes all-inclusive with the largest hopper in the industry, a 4-horsepower leaf collector suction system and CenturionPro's unique triple-bag kief filtration & trim collection system. These machines are specially designed to trim both wet and dry material. SPECS: Input Voltage: 7Amp – 110V (Machine), 22Amp – 220V (Blower)Dimensions: 30" L x 25" W x 28" H Weight: 165lbs Tumbler Diameter: 2 x 6.5" Tumbler Length: 2 x 30” Number of Tumblers: 2 Human Trimmer Replacement: 100 workers Processing Capability: Wet: up to 125 lbs/hr | Dry: up to 25 lbs/hr Cuts Per Minute: 75,000 Warranty: 10 yearPURCHASE OPTIONS: CPS5000: 2 Hybrid Wet/Dry Electropolished TumblerCPS5034: 2 Hybrid Wet/Dry Quantanium Tumbler

Read more less

CenturionPro Silver Bullet Quantanium Wet/DryThe CenturionPro Silver Bullet trimmer is perfect for medium-size operations and continues to prove itself time and time again. Composed of anodized aluminum and stainless steel, it is as rugged as it is powerful.  The Silver Bullet is an enhanced version of the CenturionPro Original model trimmer. It comes with all the same inclusive features as the Original, but with the enhancement of sound control in the form of a marine-grade Infinity Bluetooth stereo and a built-in silencer for the 3-horsepower leaf collector suction system. The Silver Bullet is a great option if you trim in a confined space, want to be a little more discrete, or you just want to liven up your trim sessions! These machines are specially designed to trim both wet and dry material for unprecedented versatility.Quantanium Tumbler Upgrade CenturionPro's Quantanium Coated Tumblers delicately handle flowers and give 40% greater trichome preservation. This technology prevents precious trichomes from adhering to the tumbler surface without the need for special lubricants or sprays. This also speeds up the harvesting process since no downtime is required to stop and clean the tumblers throughout the day. A simple wipe down with a cloth and warm water will remove the small amount of residue that may be present. SPECS: Input Voltage: 7Amp – 110V (Machine), 15Amp – 220V (Blower)Dimensions: 30″ L x 13″ W x 28″ H Weight: 90lbs Tumbler Diameter: 6.5" Tumbler Length: 30” Number of Tumblers: 1 Human Trimmer Replacement: 60 workers Processing Capability Dry: Wet: up to 75 lbs/hr | up to 15 lbs/hr Cuts Per Minute: 37,500 Warranty: 10 yearPURCHASE OPTIONS: CPS4000: 1 Hybrid Wet/Dry Electropolished TumblerCPS4013: 1 Hybrid Wet/Dry Quantanium Tumbler

Read more less