Hydro Systems

Active Aqua’s Grow Flow is the most efficient ebb & flow system on the market. With the Grow Flow’s easy-to-program controller unit, you can pretty much "set it and forget it." And since your pumps are only pumping a short time each day, the system is extremely reliable and efficient. Just set the fill and drain cycles, and the controller unit does the rest! As for safety, the Grow Flow is the only unit available with fail-safe overflow protection. If the float valve stops operating, the LED indicator lights up on the control panel and the emergency shut-off valve automatically shuts down the system, preventing any spillage or damage to your growing area. Have bigger plans? With our convenient Grow Flow Expansion Kits you can connect up to 24 growing modules to a single 5-gallon system – and up to 48 modules with the 2-gallon system! You can also build your own system from the ground up by purchasing all the components individually. Save money in your initial setup! The Grow Flow System has everything you need to get started, right down to the fittings and tubing. 12-site complete system. Includes: • 7-gallon digital controller unit with 3-year warranty • Tubing and fittings • 55-gallon distribution reservoir with drilled lid and lock • Two 250 GPH high-flow pumps • Twelve bucket modules (2 gallon)

Read more less

Each Grow Flow Controller Unit can control up to 24 of our 5-gallon growing modules, and up to 48 2-gallon modules. Includes one 7-gallon controller bucket, premium Grasslin® timer, two 250 GPH pumps, all fittings, 1/2" tubing for pumps, and sample nutrients. Emergency shut-off valve provides fail-safe overflow protection Adjustable ladder level control lets you fill containers to the desired height Heavy duty float switches dictate when and where water flows Submersible pumps coordinate the flow of water within plant sites Includes 3/4" straight connectors and 3/4"-1/2" reducer fittings to accommodate both 2 and 5 gallon buckets. Active Aqua’s Grow Flow is the most efficient ebb & flow system on the market. With the Grow Flow’s easy-to-program controller unit, you can pretty much "set it and forget it." And since your pumps are only pumping a short time each day, the system is extremely reliable and efficient. Just set the fill and drain cycles, and the controller unit does the rest! As for safety, the Grow Flow is the only unit available with fail-safe overflow protection. If the float valve stops operating, the LED indicator lights up on the control panel and the emergency shut-off valve automatically shuts down the system, preventing any spillage or damage to your growing area. Have bigger plans? With our convenient Grow Flow Expansion Kits* you can connect up to 24 growing modules to a single 5-gallon system – and up to 48 modules with the 2-gallon system! You can also build your own system from the ground up by purchasing all the components individually.  

Read more less

Hydrofarm's self-watering planters provide lightweight, strong support for tomatoes, beans, peas and other climbing plants and flowers. An easy-to-fill reservoir system delivers water and nutrients from below, helping avoid overwatering and underwatering. The sturdy frame construction helps support the weight of the vines as they grow, allowing the plant to devote more energy to developing fruit—and preventing the fruit from falling off before it's ripe.  Trellis expands to over 3 feet tall 10" x 10" x 8" inside dimensions Includes square base and planter, 3 support rings and 3 connecting risers  

Read more less

Hydrofarm's self-watering planters provide lightweight, strong support for tomatoes, beans, peas and other climbing plants and flowers. An easy-to-fill reservoir system delivers water and nutrients from below, helping avoid over- or underwatering. The sturdy frame construction helps support the weight of the vines as they grow, allowing the plant to devote more energy to developing fruit - and preventing the fruit from falling off before it's ripe.  Trellis expands to over 4 feet tall and snaps together Inside dimensions: 11"W x 25"L x 9"H (13"H including reservoir) Includes rectangular base and planter, 3 risers with supports, and 2 side support brackets Holds approximately 10 gallons of media

Read more less

The Tomato Barrel planting system provides both a planting container and built-in staking for plant support. It provides lightweight, strong support for tomatoes, beans, peas and other climbing plants and flowers. An easy-to-fill reservoir delivers water and nutrients from below, helping to avoid over or underwatering. The sturdy frame helps support the weight of the vines as they grow, allowing the plant to devote more energy to developing fruit - and preventing the fruit from falling off before it's ripe.

Read more less

EZ-CLONE Cloning Collars are designed specifically to be used in the EZ-CLONE Cloning System. They are manufactured from a sterile material and are engineered to protect and hold your cuttings upright in the lid, exposing the top leaves to air and light, while allowing the stems of your cuttings to be completely unrestricted to the inside of the misting chamber.

Read more less

EZ-CLONE Cloning Collars are designed specifically to be used in the EZ-CLONE Cloning System. They are manufactured from a sterile material and are engineered to protect and hold your cuttings upright in the lid, exposing the top leaves to air and light, while allowing the stems of your cuttings to be completely unrestricted to the inside of the misting chamber. Currently, EZ-CLONE Cloning Collars are available in a new high density Hard material as well as the same great Soft material that we have been using for years. EZ-CLONE Cloning Collars are available in 17, 35, and 65 packs. 

Read more less

EZ-CLONE Cloning Collars are designed specifically to be used in the EZ-CLONE Cloning System. They are manufactured from a sterile material and are engineered to protect and hold your cuttings upright in the lid, exposing the top leaves to air and light, while allowing the stems of your cuttings to be completely unrestricted to the inside of the misting chamber. Currently, EZ-CLONE Cloning Collars are available in a new high density Hard material as well as the same great Soft material that we have been using for years. EZ-CLONE Cloning Collars are available in 17, 35, and 65 packs. 

Read more less

EZ-CLONE Cloning Collars are designed specifically to be used in the EZ-CLONE Cloning System. They are manufactured from a sterile material and are engineered to protect and hold your cuttings upright in the lid, exposing the top leaves to air and light, while allowing the stems of your cuttings to be completely unrestricted to the inside of the misting chamber. Currently, EZ-CLONE Cloning Collars are available in a new high density Hard material as well as the same great Soft material that we have been using for years. EZ-CLONE Cloning Collars are available in 17, 35, and 65 packs. 

Read more less

EZ-CLONE Cloning Collars are designed specifically to be used in the EZ-CLONE Cloning System. They are manufactured from a sterile material and are engineered to protect and hold your cuttings upright in the lid, exposing the top leaves to air and light, while allowing the stems of your cuttings to be completely unrestricted to the inside of the misting chamber.

Read more less

EZ-CLONE Cloning Collars are designed specifically to be used in the EZ-CLONE Cloning System. They are manufactured from a sterile material and are engineered to protect and hold your cuttings upright in the lid, exposing the top leaves to air and light, while allowing the stems of your cuttings to be completely unrestricted to the inside of the misting chamber. Currently, EZ-CLONE Cloning Collars are available in a new high density Hard material as well as the same great Soft material that we have been using for years. EZ-CLONE Cloning Collars are available in 17, 35, and 65 packs. 

Read more less

The new EZ-Clone® Low Pro 64 Black has been made from fully recyclable HDPE which highly chemically resistant and extremely durable. Now has leak resistant cord outlet that allows multiple cords. Also a specially designed recessed drain that allows it to be highly protected and gives the ability to easily tip the unit for draining. These are just some of the 75 plus improvements designed specifically to make cloning even easier. All Low Pro 64 systems come with a MAG 750 pump

Read more less